|
Infrastructure
Presently Department of Chemical
Engineering has sufficient infrastructure for running B.Tech. Chemical
Engineering in terms of specialized state of art laboratories such as Chemical Engg. Lab.-I (Heat Transfer & Chemical Reaction Engg.), Chemical Engg. Lab.-II (Fluid Machanics & Mass Transfer), Chemical Engg. Lab.-III, Instrumentation Lab. Process
Simulation Lab. and Research Lab. |
The list of some major
instruments/equipment (lab wise) in the Department is given below:
A. |
Chemical Engg. Lab.-I |
1. | Isothermal Batch Reactor |
2. | Plug Flow Reactor (Straight Tube) |
3. | Plug Flow Reactor (Coil Type) |
4. | RTD Studies Plug Flow Reactor (Coil Tube Type) |
5. | Continuous Stirred Tank Reactor (CSTR) |
6. | Shell & Tube Heat exchanger |
7. | Vertical and Horizontal Condenser |
8. | Fin Tube Heat Exchanger |
9. | Forced Draft Tray Dryer |
10. | Drag Coefficient System |
11. | Aeration Unit System |
12. | Heat Transfer in Agitated Vessel |
B. |
Chemical Engg. Lab.-II |
1. | Vapor-Liquid Equilibrium System |
2. | Liquid-Liquid Extraction System |
3. | Steam Distillation System |
4. | Continuous Packed Bed Distillation Column |
5. | Solid in Air Diffusion System |
6. | Ball Mill (Constant Speed) |
7. | Ball Mill (Variable Speed) |
8. | Jaw Crusher |
9. | Roll Crusher |
10. | Gyratory Sieve Shaker with Test sieves |
11. | Pressure drop due to various kind of fitting |
12. | Pressure drop due to frictional losses |
13. | Centrifugal Pump Test Rig (Constant Speed) |
14. | Centrifugal Pump Test Rig (Variable Speed) |
15. | Adsorption in Packed Bed |
16. | Rotary Vacuum Filter |
C. Chemical Engg. Lab.-III
This lab. is provided with the instruments/equipments required for the basic analytical analysis.
D. |
Instrumentation Lab. |
1. | Time Constant of Thermocouple and Thermometer |
2. | Time Constant of Manometer |
3. | Refractometer |
4. | Digital Tachometer |
5. | Trainer for Temperature Control |
6. | Trainer for Pressure Control |
7. | Trainer for Level Control |
8. | Trainer for Flow Control |
9. | Microprocessor Based Conductivity / TDS meter |
10. | Digital Electronic Weighing Balance |
11. | Digital PH Meter |
12. | Distilled Water Unit |
E. Process Simulation Lab.
Process Simulation Lab provides an overview of working of equipments and helps in solving flow-sheets by using simulation software. The lab is also equipped with other softwares; the lab is having a capacity of 50 students. |
The advanced software used, are
given as below:
1. | Pro-Simulator |
2. |
ASPEN |
3. | UNISIM Design |
4. | OLI Analyzer |
5. | TK Solver |
6. | AFT Fathom |
1.