|
Infrastructure
| Presently Department of Chemical
Engineering has sufficient infrastructure for running B.Tech. Chemical
Engineering in terms of specialized state of art laboratories such as Chemical Engg. Lab.-I (Heat Transfer & Chemical Reaction Engg.), Chemical Engg. Lab.-II (Fluid Machanics & Mass Transfer), Chemical Engg. Lab.-III, Instrumentation Lab. Process
Simulation Lab. and Research Lab. |
The list of some major
instruments/equipment (lab wise) in the Department is given below:
|
A. |
Chemical Engg. Lab.-I |
| 1. | Isothermal Batch Reactor |
| 2. | Plug Flow Reactor (Straight Tube) |
| 3. | Plug Flow Reactor (Coil Type) |
| 4. | RTD Studies Plug Flow Reactor (Coil Tube Type) |
| 5. | Continuous Stirred Tank Reactor (CSTR) |
| 6. | Shell & Tube Heat exchanger |
| 7. | Vertical and Horizontal Condenser |
| 8. | Fin Tube Heat Exchanger |
| 9. | Forced Draft Tray Dryer |
| 10. | Drag Coefficient System |
| 11. | Aeration Unit System |
| 12. | Heat Transfer in Agitated Vessel |
|
B. |
Chemical Engg. Lab.-II |
| 1. | Vapor-Liquid Equilibrium System |
| 2. | Liquid-Liquid Extraction System |
| 3. | Steam Distillation System |
| 4. | Continuous Packed Bed Distillation Column |
| 5. | Solid in Air Diffusion System |
| 6. | Ball Mill (Constant Speed) |
| 7. | Ball Mill (Variable Speed) |
| 8. | Jaw Crusher |
| 9. | Roll Crusher |
| 10. | Gyratory Sieve Shaker with Test sieves |
| 11. | Pressure drop due to various kind of fitting |
| 12. | Pressure drop due to frictional losses |
| 13. | Centrifugal Pump Test Rig (Constant Speed) |
| 14. | Centrifugal Pump Test Rig (Variable Speed) |
| 15. | Adsorption in Packed Bed |
| 16. | Rotary Vacuum Filter |
C. Chemical Engg. Lab.-III
This lab. is provided with the instruments/equipments required for the basic analytical analysis.
|
D. |
Instrumentation Lab. |
| 1. | Time Constant of Thermocouple and Thermometer |
| 2. | Time Constant of Manometer |
| 3. | Refractometer |
| 4. | Digital Tachometer |
| 5. | Trainer for Temperature Control |
| 6. | Trainer for Pressure Control |
| 7. | Trainer for Level Control |
| 8. | Trainer for Flow Control |
| 9. | Microprocessor Based Conductivity / TDS meter |
| 10. | Digital Electronic Weighing Balance |
| 11. | Digital PH Meter |
| 12. | Distilled Water Unit |
E. Process Simulation Lab.
| Process Simulation Lab provides an overview of working of equipments and helps in solving flow-sheets by using simulation software. The lab is also equipped with other softwares; the lab is having a capacity of 50 students. |
The advanced software used, are
given as below:
| 1. | Pro-Simulator |
| 2. |
ASPEN |
| 3. | UNISIM Design |
| 4. | OLI Analyzer |
| 5. | TK Solver |
| 6. | AFT Fathom |
1.
